Monday 4 December 2017

Anna University Revaluation Exam Results November December 2017 - Coe1 Coe2 Results links

in: at December 04, 2017
[pullquote align="normal"] [/pullquote]
Anna University Examination is yet to finish.Once we get the notifications about the results, we will update it here.So check this page frequently.Anna University Exam Results November December 2017.
In our blog, we will provide all information regarding the anna university and syllabus of anna university subjects.

anna university results 2017

Anna University Results 2017

Once anna university results are published, we will inform you in our blog.You can check anna university results using coe1 and coe2 portal.


Check anna university internal marks 

Visit coe1 to check anna university results.

Anna University Result Coe

Anna University can also be checked using coe portal.To check anna university results directly from coe1 and coe2 kindly use below link.

Anna University Result Coe2

If coe1 link fails to open you can check the anna university result with coe2.Check anna university result in coe2 using below link.

Anna University Results With CGPA

Do you want to know your CGPA along with your results?

Then you can use coe1 and coe2 portal.Anna university result app doesn't has a feature to show cgpa of results.

Anna University result check 


Anna University Results in 2017

Anna university students check your results with official anna university result link.We will update results date once we get notifications.

Anna University results nov dec 2017

Anna university results November December 2017 is yet to publish.We will update the result date soon on our blog.If results are published check it using coe1 and coe2.

Anna University Exam Result Date

Stay tuned.We will inform result updates soon on our site.Check result using our links above.

Anna University Result Link

Check anna university results from below link

 

Anna University Sem Results

Anna university results date will be published here.Bookmark this page and check frequently.

Anna University Result Website

Check your au results using link.Copy and paste the below URL.
  • http://coe1.annauniv.edu/home/
  • http://coe2.annauniv.edu/

Anna University Result For BE

Anna University Result for BE 2017 odd sem is yet to release.Check the result from above link.

Share this with your friends.
Read More

Anna University Coe1 and Coe2 Results Link

in: at December 04, 2017
[pullquote align="normal"] [/pullquote]
Anna University Results for nov dec 2017 will be published soon.The result date will be update soon.You can see the anna university official results in coe1 and coe2 portal of anna university.To make your job easy we have added the coe1 direct link for results and coe2 results below.

coe2.annauniv.edu

Coe1.annauniv.edu result link

Anna University results will be published on coe1 and coe2 portal.Use below link to check anna university results 2017.

If coe1 fails to load or takes time to load kindly check at coe2 link below.


Coe2.annauniv.edu result link

You can also check au results in coe2 portal.Check the link for au coe2.annauniv.edu link from below.

Anna University Result Updates.

We are happy to tell you that we provide anna university results updates in our sites.Kindly Check It using below link.

Read More

Friday 27 October 2017

Anna University Internal Marks 2017- COE1.ANNAUNIV.EDU-COE2

in: at October 27, 2017
[pullquote align="normal"] [/pullquote]
Anna university internal marks for the year 2017 or you can say Anna University internal marks November December 2017 is published.Anna university internal marks for even semester 2017.
We provide the direct link to check your internal marks 2017 in our site.You can check for Anna university syllabus from our site.

Anna University Internal Marks 2017


Anna University Internal Marks 2017
Check anna university internal mark at http://coe1.annauniv.edu
You can also check internal marks from http://coe2.annauniv.edu

Both coe1 and coe2 is the official site to check anna univ anna university internal marks 2017 even semester.Go to this site and enter your register number and DOB in students login section.There you can check your internal marks 2017 and your previous semester results.This is the same site where anna university results november december 2017 going to be published 

Check Anna Univ Internal Marks @http://coe1.annauniv.edu

Check Anna University Internal Marks 2017 in coe1

To check anna university internal marks in coe1 or coe1.annauniv.edu follow these steps.
  • Enter Register Number In Students Login
  • Enter DOB
  • Solve CAPTCHA
  • Login
  • Check Internal Marks

Check Anna University Internal Marks 2017 in coe2.annauniv.edu

To check anna university internal marks in coe2 or coe2.annauniv.edu follow these steps.
  • Enter Register Number In Students Login
  • Enter DOB
  • Solve CAPTCHA
  • Login
  • Check Internal Marks
Kindly do share this with your friends. 

Incoming Searches
anna university internal marks details
anna university internal marks check up
anna university internal marks calculation
anna university internal marks app
anna university internal marks check
anna university internal marks entry
anna university internal marks in 2017
anna university internal marks student login
anna university internal marks result
anna university internal marks

Read More

Thursday 31 August 2017

MA6251 MATHEMATICS – II Syllabus Anna University Regulation 2013

in: at August 31, 2017
[pullquote align="normal"] [/pullquote]
Get the MA6252 Syllabs From Here.Download all the anna university syllabus from our site.Check anna university result updates.
MA6251 MATHEMATICS – II Syllabus
MA6251 MATHEMATICS – II                                                                                     L T P C 3 1 0 4
OBJECTIVES:
To make the student acquire sound knowledge of techniques in solving ordinary differential equations that model engineering problems.
 To acquaint the student with the concepts of vector calculus, needed for problems in all engineering disciplines.
 To develop an understanding of the standard techniques of complex variable theory so as to enable the student to apply them with confidence, in application areas such as heat conduction, elasticity, fluid dynamics and flow the of electric current.
 To make the student appreciate the purpose of using transforms to create a new domain in which it is easier to handle the problem that is being investigated.
UNIT I VECTOR CALCULUS                                                                                                      9+3 
Gradient, divergence and curl – Directional derivative – Irrotational and solenoidal vector fields – Vector integration – Green‟s theorem in a plane, Gauss divergence theorem and Stokes‟ theorem (excluding proofs) – Simple applications involving cubes and rectangular parallelopipeds.
UNIT II ORDINARY DIFFERENTIAL EQUATIONS                                                                 9+3 
Higher order linear differential equations with constant coefficients – Method of variation of parameters – Cauchy‟s and Legendre‟s linear equations – Simultaneous first order linear equations with constant coefficients.
 UNIT III LAPLACE TRANSFORM                                                                                              9+3 
Laplace transform – Sufficient condition for existence – Transform of elementary functions – Basic properties – Transforms of derivatives and integrals of functions - Derivatives and integrals of transforms - Transforms of unit step function and impulse functions – Transform of periodic functions. Inverse Laplace transform -Statement of Convolution theorem – Initial and final value theorems – Solution of linear ODE of second order with constant coefficients using Laplace transformation techniques.
UNIT IV ANALYTIC FUNCTIONS                                                                                                9+3
Functions of a complex variable – Analytic functions: Necessary conditions – Cauchy-Riemann equations and sufficient conditions (excluding proofs) – Harmonic and orthogonal properties of analytic function – Harmonic conjugate – Construction of analytic functions – Conformal mapping: w = z+k, kz, 1/z, z2, ez and bilinear transformation.
UNIT V COMPLEX INTEGRATION                                                                                            9+3
Complex integration – Statement and applications of Cauchy‟s integral theorem and Cauchy‟s integral formula – Taylor‟s and Laurent‟s series expansions – Singular points – Residues – Cauchy‟s residue theorem – Evaluation of real definite integrals as contour integrals around unit circle and semi-circle (excluding poles on the real axis).                                                    TOTAL (L:45+T:15): 60 PERIODS 
OUTCOMES:
 The subject helps the students to develop the fundamentals and basic concepts in vector calculus, ODE, Laplace transform and complex functions. Students will be able to solve problems related to engineering applications by using these techniques.
TEXT BOOKS:
1. Bali N. P and Manish Goyal, “A Text book of Engineering Mathematics”, Eighth Edition, Laxmi Publications Pvt Ltd.,2011.
2. Grewal. B.S, “Higher Engineering Mathematics”, 41st Edition, Khanna Publications, Delhi, 2011.
25
REFERENCES:
1. Dass, H.K., and Er. Rajnish Verma,” Higher Engineering Mathematics”, S. Chand Private Ltd., 2011
2. Glyn James, “Advanced Modern Engineering Mathematics”, 3rd Edition, Pearson Education, 2012.
3. Peter V. O‟Neil,” Advanced Engineering Mathematics”, 7th Edition, Cengage learning, 2012.
4. Ramana B.V, “Higher Engineering Mathematics”, Tata McGraw Hill Publishing Company, New Delhi, 2008.
5. Sivarama Krishna Das P. and Rukmangadachari E., “Engineering Mathematics” Volume II, Second Edition, PEARSON Publishing 2011.
Read More

Saturday 26 August 2017

CY6251 ENGINEERING CHEMISTRY-II Syllabus Regulation 2013

in: at August 26, 2017
[pullquote align="normal"] [/pullquote]
Check anna university results.

CY6251 ENGINEERING CHEMISTRY-II                                                                 L T P C 3 0 0 3 
OBJECTIVES:
 To make the students conversant with boiler feed water requirements, related problems and water treatment techniques.
 Principles of electrochemical reactions, redox reactions in corrosiion of materials and methods for corrosion prevention and protection of materials.
 Principles and generation of energy in batteries, nuclear reactors, solar cells, wind mills and fuel cells.
 Preparation, properties and applications of engineering materials.
 Types of fuels, calorific value calculations, manufacture of solid, liquid and gaseous fuels.
UNIT I WATER TECHNOLOGY                                                                                            9
Introduction to boiler feed water-requirements-formation of deposits in steam boilers and heat exchangers- disadvantages (wastage of fuels, decrease in efficiency, boiler explosion) prevention of scale formation -softening of hard water -external treatment zeolite and demineralization - internal treatment- boiler compounds (phosphate, calgon, carbonate, colloidal) - caustic embrittlement-boiler corrosion-priming and foaming- desalination of brackish water –reverse osmosis.
UNIT II ELECTROCHEMISTRY AND CORROSION                                                          9 
Electrochemical cell - redox reaction, electrode potential- origin of electrode potential- oxidation potential- reduction potential, measurement and applications - electrochemical series and its significance - Nernst equation (derivation and problems). Corrosion- causes- factors- types-chemical, electrochemical corrosion (galvanic, differential aeration), corrosion control - material selection and design aspects - electrochemical protection – sacrificial anode method and impressed current cathodic method. Paints- constituents and function. Electroplating of Copper and electroless plating of nickel.
UNIT III ENERGY SOURCES                                                                                                 9
Introduction- nuclear energy- nuclear fission- controlled nuclear fission- nuclear fusion- differences between nuclear fission and fusion- nuclear chain reactions- nuclear reactor power generator- classification of nuclear reactor- light water reactor- breeder reactor- solar energy conversion- solar cells- wind energy. Batteries and fuel cells:Types of batteries- alkaline battery- lead storage battery- nickel-cadmium battery- lithium battery- fuel cell H2 -O2 fuel cell- applications.
UNIT IV ENGINEERING MATERIALS 9
Abrasives: definition, classification or types, grinding wheel, abrasive paper and cloth. Refractories: definition, characteristics, classification, properties – refractoriness and RUL, dimensional stability, thermal spalling, thermal expansion, porosity; Manufacture of alumina, magnesite and silicon carbide, Portland cement- manufacture and properties - setting and hardening of cement, special cement- waterproof and white cement–properties and uses. Glass - manufacture, types, properties and uses.
UNIT V FUELS AND COMBUSTION                                                                                    9
 Fuel: Introduction- classification of fuels- calorific value- higher and lower calorific values- coal- analysis of coal (proximate and ultimate)- carbonization- manufacture of metallurgical coke (Otto Hoffmann method) - petroleum- manufacture of synthetic petrol (Bergius process)- knocking- octane number - diesel oil- cetane number - natural gas- compressed natural gas(CNG)- liquefied petroleum gases(LPG)- producer gas- water gas. Power alcohol and bio diesel. Combustion of fuels: introduction- theoretical calculation of calorific value- calculation of stoichiometry of fuel and air ratio- ignition temperature- explosive range - flue gas analysis (ORSAT Method).                                                                                  TOTAL: 45 PERIODS
OUTCOMES: 
The knowledge gained on engineering materials, fuels, energy sources and water treatment techniques will facilitate better understanding of engineering processes and applications for further learning. TEXT BOOKS:
1. Vairam S, Kalyani P and SubaRamesh.,“Engineering Chemistry”., Wiley India Pvt Ltd.,New Delhi., 2011
2. Dara S.S and Umare S.S. “Engineering Chemistry”, S. Chand & Company Ltd., New Delhi , 2010
REFERENCES:
1. Kannan P. and Ravikrishnan A., “Engineering Chemistry”, Sri Krishna Hi-tech Publishing Company Pvt. Ltd. Chennai, 2009
2. AshimaSrivastava and Janhavi N N., “Concepts of Engineering Chemistry”, ACME Learning Private Limited., New Delhi., 2010.
3. RenuBapna and Renu Gupta., “Engineering Chemistry”, Macmillan India Publisher Ltd., 2010.
4. Pahari A and Chauhan B., “Engineering Chemistry”., Firewall Media., New Delhi., 2010
Read More

GE6152 ENGINEERING GRAPHICS Syllabus Anna University

at August 26, 2017
[pullquote align="normal"] [/pullquote]
Get the GE6152 ENGINEERING GRAPHICS  Syllabus anna university first semester all departments regulation 2013.

GE6152 ENGINEERING GRAPHICS 

GE6152 ENGINEERING GRAPHICS                                                                        L T P C 2 0 3 4 
OBJECTIVES:
 To develop in students, graphic skills for communication of concepts, ideas and design of Engineering products
 To expose them to existing national standards related to technical drawings.
CONCEPTS AND CONVENTIONS (Not for Examination) 1 Importance of graphics in engineering applications – Use of drafting instruments – BIS conventions and specifications – Size, layout and folding of drawing sheets – Lettering and dimensioning.
UNIT I PLANE CURVES AND FREE HAND SKETCHING                                                    5+9 
Basic Geometrical constructions, Curves used in engineering practices: Conics – Construction of ellipse, parabola and hyperbola by eccentricity method – Construction of cycloid – construction of involutes of square and circle – Drawing of tangents and normal to the above curves, Scales: Construction of Diagonal and Vernier scales. Visualization concepts and Free Hand sketching: Visualization principles –Representation of Three Dimensional objects – Layout of views- Free hand sketching of multiple views from pictorial views of objects
UNIT II PROJECTION OF POINTS, LINES AND PLANE SURFACES                              5+ 9 
Orthographic projection- principles-Principal planes-First angle projection-projection of points. Projection of straight lines (only First angle projections) inclined to both the principal planes - Determination of true lengths and true inclinations by rotating line method and traces Projection of planes (polygonal and circular surfaces) inclined to both the principal planes by rotating object method.
UNIT III PROJECTION OF SOLIDS                                                                                       5 + 9 
Projection of simple solids like prisms, pyramids, cylinder, cone and truncated solids when the axis is inclined to one of the principal planes by rotating object method and auxiliary plane method.
UNIT IV PROJECTION OF SECTIONED SOLIDS AND DEVELOPMENT OF SURFACES 5+9 Sectioning of above solids in simple vertical position when the cutting plane is inclined to the one of the principal planes and perpendicular to the other – obtaining true shape of section. Development of lateral surfaces of simple and sectioned solids – Prisms, pyramids cylinders and cones. Development of lateral surfaces of solids with cut-outs and holes
UNIT V ISOMETRIC AND PERSPECTIVE PROJECTIONS                                                 6 + 9
Principles of isometric projection – isometric scale –Isometric projections of simple solids and truncated solids - Prisms, pyramids, cylinders, cones- combination of two solid objects in simple vertical positions and miscellaneous problems. Perspective projection of simple solids-Prisms, pyramids and cylinders by visual ray method . COMPUTER AIDED DRAFTING (Demonstration Only) 3 Introduction to drafting packages and demonstration of their use.                                                                                   TOTAL: 75 PERIODS
OUTCOMES:
On Completion of the course the student will be able to:
 Perform free hand sketching of basic geometrical constructions and multiple views of objects.
 Do orthographic projection of lines and plane surfaces.
 Draw projections and solids and development of surfaces.
 Prepare isometric and perspective sections of simple solids.
 Demonstrate computer aided drafting.
TEXT BOOK:
 1. Bhatt N.D. and Panchal V.M., “Engineering Drawing”, Charotar Publishing House, 50th Edition, 2010.
16
REFERENCES:
1. Gopalakrishna K.R., “Engineering Drawing” (Vol. I&II combined), Subhas Stores, Bangalore, 2007.
2. Luzzader, Warren.J. and Duff,John M., “Fundamentals of Engineering Drawing with an introduction to Interactive Computer Graphics for Design and Production, Eastern Economy Edition, Prentice Hall of India Pvt. Ltd, New Delhi, 2005.
3. Shah M.B., and Rana B.C., “Engineering Drawing”, Pearson, 2nd Edition, 2009.
4. Venugopal K. and Prabhu Raja V., “Engineering Graphics”, New Age
International (P) Limited, 2008.
5. Natrajan K.V., “A text book of Engineering Graphics”, Dhanalakshmi
Publishers, Chennai, 2009.
6. Basant Agarwal and Agarwal C.M., “Engineering Drawing”, Tata McGraw Hill Publishing Company Limited, New Delhi, 2008.
Publication of Bureau of Indian Standards: 1. IS 10711 – 2001: Technical products Documentation – Size and lay out of drawing sheets. 2. IS 9609 (Parts 0 & 1) – 2001: Technical products Documentation – Lettering. 3. IS 10714 (Part 20) – 2001 & SP 46 – 2003: Lines for technical drawings. 4. IS 11669 – 1986 & SP 46 – 2003: Dimensioning of Technical Drawings. 5. IS 15021 (Parts 1 to 4) – 2001: Technical drawings – Projection Methods. Special points applicable to University Examinations on Engineering Graphics:
1. There will be five questions, each of either or type covering all
units of the syllabus. 2. All questions will carry equal marks of 20 each making a total of 100. 3. The answer paper shall consist of drawing sheets of A3 size only. The students will be permitted to use appropriate scale to fit solution within A3 size.
4. The examination will be conducted in appropriate sessions on the same day
Read More

EE6201 CIRCUIT THEORY Syllabus Anna University

in: at August 26, 2017
[pullquote align="normal"] [/pullquote]
Get the EE6201 CIRCUIT THEORY Syllabus Anna university regulation 2013 second semester.Get all the anna university syllabus from here

EE6201 CIRCUIT THEORY Syllabus

EE6201 CIRCUIT THEORY                                                                                       L T P C 3 1 0 4
OBJECTIVES:
 To introduce electric circuits and its analysis
 To impart knowledge on solving circuits using network theorems
 To introduce the phenomenon of resonance in coupled circuits.
 To educate on obtaining the transient response of circuits.
 To Phasor diagrams and analysis of three phase circuits
UNIT I BASIC CIRCUITS ANALYSIS                                                                                            12
 Ohm‟s Law – Kirchoffs laws – DC and AC Circuits – Resistors in series and parallel circuits – Mesh current and node voltage method of analysis for D.C and A.C. circuits – Phasor Diagram – Power, Power Factor and Energy
UNIT II NETWORK REDUCTION AND NETWORK THEOREMS FOR DC AND AC CIRCUITS                                                                                                                                           12
Network reduction: voltage and current division, source transformation – star delta conversion. Thevenins and Novton & Theorem – Superposition Theorem – Maximum power transfer theorem – Reciprocity Theorem.
UNIT III RESONANCE AND COUPLED CIRCUITS                                                                   12 
Series and paralled resonance – their frequency response – Quality factor and Bandwidth - Self and mutual inductance – Coefficient of coupling – Tuned circuits – Single tuned circuits.
UNIT IV TRANSIENT RESPONSE FOR DC CIRCUITS                                                             12 
Transient response of RL, RC and RLC Circuits using Laplace transform for DC input and A.C. with sinusoidal input – Characterization of two port networks in terms of Z,Y and h parameters.
UNIT V THREE PHASE CIRCUITS                                                                                                12
Three phase balanced / unbalanced voltage sources – analysis of three phase 3-wire and 4-wire circuits with star and delta connected loads, balanced & un balanced – phasor diagram of voltages and currents – power and power factor measurements in three phase circuits.                                         TOTAL: 60 PERIODS
OUTCOMES:
 Ability analyse electrical circuits
 Ability to apply circuit theorems
 Ability to analyse AC and DC Circuits
TEXT BOOKS:
 1. William H. Hayt Jr, Jack E. Kemmerly and Steven M. Durbin, “Engineering Circuits Analysis”, Tata McGraw Hill publishers, 6th edition, New Delhi, 2003. 2. Joseph A. Edminister, Mahmood Nahri, “Electric circuits”, Schaum‟s series, Tata McGraw-Hill, New Delhi, 2001. REFERENCES:
1. Paranjothi SR, “Electric Circuits Analysis,” New Age International Ltd., New Delhi, 1996.
2. Sudhakar A and Shyam Mohan SP, “Circuits and Network Analysis and Synthesis”,Tata McGraw Hill, 2007.
3. Chakrabati A, “Circuits Theory (Analysis and synthesis), Dhanpath Rai & Sons, New Delhi, 1999.
4. Charles K. Alexander, Mathew N.O. Sadiku, “Fundamentals of Electric Circuits”, Second Edition, McGraw Hill, 2003.
Read More

Home

The content is strictly copyrighted to the Admin and may not be reproduced without permission.

© 2014 Designed by Imran